环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

西湖凹陷中部西斜坡地区超压成因机制

沉积盆地超压成因研究已取得了重要进展，关于超压主要成因的认识也发生了重要变化，以往一些被普遍认为属于典型不均衡压实成因的超压已被部分或完全否定，生烃作用作为超压成因的普遍性得到愈来愈多的证实。西湖凹陷多个构造带的不同层位均发育超压，目前认为超压的形成仍然离不开不均衡压实（欠压实作用）的贡献。根据异常压力形成的基本地质条件和异常压力产生的地质、地球物理效应两方面因素，利用测井曲线组合分析法、鲍尔斯法（加载-卸载曲线法）、声波速度-密度交会图法、孔隙度对比法、压力计算反推法以及综合分析法系统解剖分析了西湖凹陷中部西斜坡地区平湖组不同岩性异常压力成因。研究结果表明：西湖凹陷中部西斜坡泥岩中烃源岩超压主要为自源生烃增压，非烃源岩超压为邻源压力传导成因。储层中至少存在常压-超压型和常压-超压-常压型两种压力结构类型，异常压力自南向北顶界面逐渐变深，主要为油气在生烃增压驱动下向储层运移过程中的压力传导所致。     

气瓶内部淬火过程的流动换热特性

 大直径厚壁气瓶内部淬火时的流动换热过程极其复杂，受到多种因素的影响，而研究气瓶内部压强和温度的变化规律对改善流动换热效果、提高产品组织性能具有重要的理论指导意义。以914 mm厚壁气瓶和瓶内流体为研究对象，建立了二维等效流 固耦合模型；采用多喷嘴系统对气瓶内外进行喷水淬火，研究了气瓶总长、喷水流速及淬火时间对瓶内压强及内壁温度的影响，通过间歇淬火试验验证了数学模型的正确性。结果发现，气瓶长度对瓶内压强和瓶壁温度的影响显著，喷水流速次之，当喷水流速大于8 m/s后，水量对瓶壁的冷却效果大大降低；气瓶内壁长度方向的温度梯度分别随气瓶总长的增加和淬火时间的延长而减小，但基本不受喷水量的影响。     

Mathematical model for coal conversion in supercritical water: reacting multiphase flow with conjugate heat transfer

Providing heat for supercritical water gasification (SCWG) of coal by coupling subsequent products oxidation in integrated supercritical water reactor (ISWR) provides an effective method for directional control of temperature field and avoids excessive hot spots caused by uniform heating. An exploratory numerical model incorporating particle-fluid flow dynamics, multispecies transport and thermal coupling between endothermic coal gasification and exothermic product oxidation was established to simulate the reacting multiphase flow process of coal conversion in a novel lab-scale ISWR. An eleven-lump kinetic model was proposed for the prediction of chemical reactions. And the thermal coupling relationship was described by conjugate heat transfer boundary conditions (BC). Detailed physical and chemical field distribution in ISWR were analyzed and influence factors were discussed. The results showed that oxidation of gas products as inner heat source could promote the gasification reaction with only slight or even little maximum temperature increase of the pressure-bearing wall. Coal feeding rate and oxygen supply method significantly affected the field distribution. The multi-injection compressed-air supply method provided a more uniform temperature field but would reduce heat transfer temperature difference. The carbon gasification efficiency (CGE) in the gasification zone could easily reach up to 97% under mild conditions (less than 650 °C).     

Unique crystal structures and their applications as materials for Li1+x-yM1-x-3yTix+4yO3 (M = Nb or Ta, 0.07 ≤ x ≤ 0.33, 0 ≤ y ≤ 0.175)

In the Li₂O–M₂O₅–TiO₂ (M = Nb or Ta) system, Li_1+x-yM_1-x-3yTi_x+4yO₃ (LMT) forms with a superstructure known as the M-phase, in which the periodical intergrowth layers are inserted in a matrix having a trigonal structure of LiMO₃. We have been investigating this unique material focusing on its crystal structure, photoluminescence, and electrical properties.First, the formation area of the superstructure was compared between Nb- and Ta- systems and the difference was accurately analyzed.Second, to apply this unique material as a host material of phosphor, we synthesized new phosphors with various emission colors. Red phosphor, having a high PL intensity with an internal quantum efficiency of 98%, was successfully synthesized and used as a host material of the solid solution for the Ta system. Its high value was the result of the large centroid-to-cation distance of the Eu³⁺ position in the [(Li, Eu)O₁₂] polyhedral.Further still, toward application of the unique qualities of an electro-ceramic, we successfully fabricated oriented balk ceramics for the Nb system by slip casting in a strong magnetic field of 12 T. As a result, anisotropic electric properties were found along the c-axis, which were caused by the superstructure. We first clarified the mechanism showing that the anisotropic Qf value was due to anisotropic electron conductivity and anisotropic bonding strength within the superstructure.     

聚乙烯亚胺氨基化磁性氧化石墨烯的制备及其对活性艳红X-3B的吸附

使用改性hummers法制备出氧化石墨烯(GO),通过水热法在GO上生长磁性CoFe₂O₄,再使用聚乙烯亚胺(PEI)进行氨基改性,制备出聚乙烯亚胺氨基化磁性氧化石墨烯(PEI-MGO)。使用X射线衍射仪(XRD)和扫描电子显微镜(SEM)对PEI-MGO的结构和微观形貌进行表征。结果表明:纳米级尖晶石相CoFe₂O₄均匀分散于GO上,且氨基改性成功。探讨了PEI-MGO对水体中活性艳红X-3B的吸附性能。结果表明:在活性艳红X-3B初始质量浓度为150mg/L、体积为100mL、吸附剂质量为0.04g、pH值为1、吸附时间为60min时达到平衡,平衡吸附量为361.15mg/g。PEI-MGO对活性艳红X-3B的饱和吸附量为470.58mg/g。磁分离和磁回收研究表明,PEI-MGO能快速从水体中分离,回收率为98.6%。     

Ms以下温度等温淬火对中碳贝氏体钢相变和性能影响

摘要：设计了马氏体起始相变温度（Ms）以上和以下2个不同温度等温淬火试验，结合热膨胀仪、扫描电镜显微组织、X光衍射和拉伸试验等试验手段，研究了对比于Ms以上温度等温淬火试验，Ms以下等温淬火对中碳贝氏体钢相变、组织和性能的影响。结果表明，贝氏体相变可以发生在Ms温度以下，且其相变动力学被明显促进。相比于Ms以上温度等温淬火，Ms温度以下等温淬火虽然可以加速相变动力学，但导致强度和伸长率下降，因此降低了最终的力学性能。这主要是因为Ms温度以下等温淬火试样组织内部出现了大量的回火无热马氏体（AM）和少量的贝氏体和残余奥氏体（RA）。因此，Ms温度以下等温淬火热处理后的组织性能未必优于Ms温度以上等温处理后组织性能，这主要取决于具体的成分和工艺。     

激光刻痕对取向电工钢磁畴和铁损的影响

为了研究激光刻痕工艺参数对取向电工钢表面的磁畴形貌、刻痕线宽度和铁损的影响规律，开展了激光刻痕工艺试验。结果表明，激光刻痕后取向电工钢表面的磁畴宽度明显细化，且随着输入电流的增加，磁畴宽度先减小后增大；刻痕线宽度随着输入电流的增加而增大。对于本次试验样品，通过对比分析，确定最佳激光刻痕工艺参数为电流为 12 A，激光频率为 5 kHz，刻痕速度为 800 mm/s，该参数下铁损改善率可达 11.81%。     

Thermal imaging of time-varying longitudinal defects in the internal coating of a tube

We deal with the mathematical model of the incremental degradation of the internal coating (e.g. a polymeric material) of a metallic pipe in which a fluid flows relatively fast. The fluid drags solid impurities so that longitudinal scratches, inaccessible to any direct inspection procedure, are produced on the coating. Time evolution of this kind of defects can be reconstructed from the knowledge of a sequence of temperature maps of the external surface. The time-varying orthogonal section of this damaged interface is determined as a function of time and polar angle through the identification of a suitable effective heat transfer coefficient by means of Thin Plate Approximation.